layer chuẩn của autocad

[Soviet-Forever]

em mới mò đc mớ này , post lên cho vui

hệ thống layer chuẩn của hội kts mỹ quy định


Conventions for Naming Layers

The CAD layer guidelines are organized using a hierarchical structure that
provides for flexibility and expandability. The first level of the hierarchy is
the discipline code. Discipline codes follow traditional sheet numbering
conventions as shown here:



A Architectural

C Civil

E Electrical

F Fire protection

G General

H Hazardous materials

I Interiors

L Landscape

M Mechanical

P Plumbing

Q Equipment

R Resource

S Structural

T Telecommunications

X Other disciplines

Z Contractor/shop drawings

Discipline codes are followed by either a hyphen or another letter that
designates a specialized discipline. For example, AG is used for architectural
graphics.

The second level of the hierarchy is the major group code. This is used to
designate a construction system or type of information. For example, a drawing
might contain layers with the following discipline and major group codes:

A-WALL Walls

A-DOOR Doors

A-GLAZ Glazing

A-EQPM Equipment

A-CLNG Ceiling information

A-ROOF Roof

E-POWR Power

S-COLS Structural columns

Layer names can be further extended with a minor group code and a status code.
The minor group is an optional, four-character field used to define
subcategories of information. For example, A-WALL-PART indicates architecture,
new, wall, partial height. IDEN for identification and PATT for pattern are two
commonly used modifiers in the minor group field.

Status codes are four-character designators used to differentiate new
construction from demolition, remodeling, and construction that is "existing to
remain." They are only needed when a project has phases of work that must be
differentiated. Defined values for this field are shown on this page under the
heading "Status Field Modifiers."

Layers representing the dominant phase of a project can be named without using a
status field. For example, in a small remodeling project, NEWW would indicate
new construction, while layers without status fields would indicate parts of the
existing building that will remain. For example, a remodeling plan might contain
the following layers:

A-WALL-NEWW New walls

A-DOOR-NEWW New doors

A-WALL-DEMO Walls to be demolished

A-DOOR-DEMO Doors to be demolished

A-WALL Existing walls to remain

A-DOOR Existing doors to remain

[Soviet-Forever]

Master Layer List

The master layer list identifies all defined layers in the CAD layer guidelines.
Users are free to add their own layers, but should identify them as
"user-defined." The use of an asterisk indicates a place holder for the
discipline code, major group, or minor group. Some layers included in the
following list are new or have been revised since the first edition of CAD Layer
Guidelines.

This list is arranged alphabetically by discipline. Layers within each
discipline are arranged by construction system.

[Soviet-Forever]

Annotation Layers

*-ANNO-TEXT Text

*-ANNO-REDL Redline

*-ANNO-SYMB Symbols

*-ANNO-LEGN Legends and schedules

*-ANNO-DIMS Dimensions

*-ANNO-TTLB Border and title block

*-ANNO-NOTE Notes

*-ANNO-NPLT Construction lines, nonplotting information

*-ANNO-KEYN Key notes

*-ANNO-REVS Revisions

Note

Annotation layer names may be appended with a four-character sheet name
designator when needed.

Common Modifiers

*-****-PATT Cross-hatching, poche'

*-****-IDEN Identification tags

*-****-ELEV Elevation (vertical surfaces in 3D)

X-RDME Read-me layer, not to be plotted

Status Field Modifiers

*-****-NEWW New work

*-****-EXST Existing to remain

*-****-DEMO Demolition

*-****-FUTR Future work

*-****-TEMP Temporary work

*-****-MOVE Items to be moved

*-****-RELO Relocated items

*-****-NICN Not in contract

*-****-PHS1-9 Phase numbers (1-9)

Note

The status field may also occur as the fourth field, following a minor group.





Architectural Layers

A-WALL-FULL Full-height walls, stair and shaft walls, walls to structure

A-WALL-PRHT Partial-height walls (do not appear on reflected ceiling plans)

A-WALL-MOVE Movable partitions

A-WALL-HEAD Door and window headers (appear on reflected ceiling plans)

A-WALL-JAMB Door and window jambs (do not appear on reflected ceiling plans)

A-WALL-PATT Wall insulation, hatching and fill

A-WALL-ELEV Wall surfaces: 3D views

A-WALL-FIRE Fire wall patterning

A-DOOR Doors

A-DOOR-FULL Full-height (to ceiling) door: swing and leaf

A-DOOR-PRHT Partial-height door: swing and leaf

A-DOOR-IDEN Door number, hardware group, etc.

A-DOOR-ELEV Doors: 3D views

A-GLAZ Windows, window walls, curtain walls, glazed partitions

A-GLAZ-FULL Full-height glazed walls and partitions

A-GLAZ-PRHT Windows and partial-height glazed partitions

A-GLAZ-SILL Windowsills

A-GLAZ-IDEN Window number

A-GLAZ-ELEV Glazing and mullions--elevation views

A-FLOR Floor information

A-FLOR-OTLN Floor or building outline

A-FLOR-LEVL Level changes, ramps, pits, depressions

A-FLOR-STRS Stair treads, escalators, ladders

A-FLOR-RISR Stair risers

A-FLOR-HRAL Stair and balcony handrails, guard-rails

A-FLOR-EVTR Elevator cars and equipment

A-FLOR-TPTN Toilet partitions

A-FLOR-SPCL Architectural specialties (toilet room accessories, display
cases)

A-FLOR-WDWK Architectural woodwork (field-built cabinets and counters)

A-FLOR-CASE Casework (manufactured cabinets)

A-FLOR-OVHD Overhead items (skylights, over-hangs-usually dashed line)

A-FLOR-RAIS Raised floors

A-FLOR-IDEN Room numbers, names, targets, etc.

A-FLOR-PATT Paving, tile, carpet patterns

A-FLOR-PFIX Plumbing fixtures

A-FLOR-FIXT Miscellaneous fixtures

A-FLOR-SIGN Signage

A-EQPM Equipment

A-EQPM-FIXD Fixed equipment

A-EQPM-MOVE Movable equipment

A-EQPM-NICN Equipment not in contract

A-EQPM-ACCS Equipment access

A-EQPM-IDEN Equipment identification numbers

A-EQPM-ELEV Equipment surfaces: 3D views

A-EQPM-CLNG Ceiling-mounted or suspended equipment

A-FURN Furniture

A-FURN-FREE Furniture: freestanding (desks, credenzas, etc.)

A-FURN-CHAR Chairs and other seating

A-FURN-FILE File cabinets

A-FURN-PNLS Furniture system panels

A-FURN-WKSF Furniture system work surface components

A-FURN-STOR Furniture system storage components

A-FURN-POWR Furniture system--power designations

A-FURN-IDEN Furniture numbers

A-FURN-PLNT Plants

A-FURN-PATT Finish patterns

A-FURN-ELEV Furniture: 3D views

A-CLNG Ceiling information

A-CLNG-GRID Ceiling grid

A-CLNG-OPEN Ceiling/roof penetrations

A-CLNG-TEES Main tees

A-CLNG-SUSP Suspended elements

A-CLNG-PATT Ceiling patterns

A-CLNG-ACCS Ceiling access

A-LITE Light fixtures

A-COLS Columns

A-HVAC-SDFF Supply diffusers

A-HVAC-RDFF Return air diffusers

A-GRID Planning grid or column grid

A-ROOF Roof

A-ROOF-OTLN Roof outline

A-ROOF-LEVL Level changes

A-ROOF-STRS Stair treads, ladders

A-ROOF-RISR Stair risers

A-ROOF-HRAL Stair handrails, nosings, guardrails

A-ROOF-PATT Roof surface patterns, hatching

A-ROOF-ELEV Roof surfaces: 3D views

A-AREA Area calculation boundary lines

A-AREA-PATT Area cross hatching

A-AREA-IDEN Room numbers, tenant identifications, area calculation

A-AREA-OCCP Occupant or employee names

A-ELEV Interior and exterior elevations

A-ELEV-OTLN Building outlines

A-ELEV-FNSH Finishes, woodwork, trim

A-ELEV-CASE Wall-mounted casework

A-ELEV-FIXT Miscellaneous fixtures

A-ELEV-PFIXT Plumbing fixtures in elevation

A-ELEV-SIGN Signage

A-ELEV-PATT Textures and hatch patterns

A-ELEV-IDEN Component identification numbers

A-SECT Sections

A-SECT-MCUT Material cut by section

A-SECT-MBND Material beyond section cut

A-SECT-PATT Textures and hatch patterns

A-SECT-IDEN Component identification numbers

A-DETL Details

A-DETL-MCUT Material cut by section

A-DETL-MBND Material beyond section cut

A-DETL-PATT Textures and hatch patterns

A-DETL-IDEN Component identification numbers

[Soviet-Forever]

Electrical Layers

E-LITE Lighting

E-LITE-SPCL Special lighting

E-LITE-EMER Emergency lighting

E-LITE-EXIT Exit lighting

E-LITE-CLNG Ceiling-mounted lighting

E-LITE-WALL Wall-mounted lighting

E-LITE-FLOR Floor-mounted lighting

E-LITE-OTLN Lighting outline for background (optional)

E-LITE-NUMB Lighting circuit numbers

E-LITE-ROOF Roof lighting

E-LITE-SITE Site lighting (see also civil group)

E-LITE-SWCH Lighting--switches

E-LITE-CIRC Lighting circuits

E-LITE-IDEN Luminaire identification and text

E-LITE-JBOX Junction box

E-POWR Power

E-POWR-WALL Power wall outlets and receptacles

E-POWR-CLNG Power--ceiling receptacles and devices

E-POWR-PANL Power panels

E-POWR-EQPM Power equipment

E-POWR-SWBD Power switchboards

E-POWR-CIRC Power circuits

E-POWR-URAC Underfloor raceways

E-POWR-UCPT Under-carpet wiring

E-POWR-CABL Cable trays

E-POWR-FEED Feeders

E-POWR-BUSW Busways

E-POWR-NUMB Power circuit numbers

E-POWR-IDEN Power identification, text

E-POWR-SITE Site power (see also civil group)

E-POWR-ROOF Roof power

E-POWR-OTLN Power outline for backgrounds

E-POWR-JBOX Junction box

E-CTRL Electric control systems

E-CTRL-DEVC Control system devices

E-CTRL-WIRE Control system wiring

E-GRND Ground system

E-GRND-CIRC Ground system circuits

E-GRND-REFR Reference ground system

E-GRND-EQUI Equipotential ground system

E-GRND-DIAG Ground system diagram

E-AUXL Auxiliary systems

E-LTNG Lightning protection system

E-FIRE Fire alarm, fire extinguishers

E-COMM Telephone, communication outlets

E-DATA Data outlets

E-SOUN Sound/PA system

E-TVAN TV antenna system

E-CCTV Closed-circuit TV

E-NURS Nurse call system

E-SERT Security

E-PGNG Paging system

E-DICT Central dictation system

E-BELL Bell system

E-CLOK Clock system

E-ALRM Miscellaneous alarm system

E-INTC Intercom system

E-LEGN Legend of symbols

E-1LIN One-line diagrams

E-RISR Riser diagram

E-SITE Site electrical substations, poles

E-SITE-LITE Site lighting

E-SITE-UNDR Underground electrical lines

E-SITE-POLE Electric poles

E-SITE-OVHD Overhead lines

[explainking]

Rất khoa học. Layer mình tự đặt nói chung cũng dựa trên cơ sở như thế này, nhưng ko Pro bằng nó. Mỹ hay thật

[danganhkd]

thank bro cái này rất thiết thực )

[trancuong220784]

Tiêu chuẩn chung nhưng mỗi cty của Mỹ, Anh đều có chế biến thêm cho phù hợp. Việt Nam ta cũng chưa thấy công ty nào xài bộ Layer chi tiết đến vậy. Bác nào mở cty mà muốn có một bộ Layer hoàn thiện theo kiểu này thì liên hệ mình nhé! Mấy cái này mình nắm rất rõ vì có ngâm cứu. Làm thành 1 bộ công cụ tích hợp trên Menu bar luôn.
Mobile: 0949777784

[giang_ackts]

Nguyên văn bởi trancuong220784

Tiêu chuẩn chung nhưng mỗi cty của Mỹ, Anh đều có chế biến thêm cho phù hợp. Việt Nam ta cũng chưa thấy công ty nào xài bộ Layer chi tiết đến vậy. Bác nào mở cty mà muốn có một bộ Layer hoàn thiện theo kiểu này thì liên hệ mình nhé! Mấy cái này mình nắm rất rõ vì có ngâm cứu. Làm thành 1 bộ công cụ tích hợp trên Menu bar luôn.
Mobile: 0949777784

share lên đi pro hoac sales off cho anh em đi.

[the_invisible]

rốt cuộc là bồ ở trên ko share rồi...

[vuongocanh]

Tiêu chuẩn của Mỹ đó.
Ai Việt hóa giúp với